Hardware Assembly

You can specify to have your parts assembled. For example you might want to specify a PEM insert for a metal enclosure or a hinge for a box.

To have your parts assembled:

1. Locate a supplier for any required hardware, adhesives, etc. (e.g. mcmaster.com) and get a price.
2. On your drawing use Comments To Machinist to specify your requirement. For example:
• "Bolt hinge here (with arrow pointing to holes) mcmaster.com #123456, $5.00 for pack of 10 - $10 total, eMachineShop supplied"
• "Insert PEM fastener - customer will supply via UPS"
• Affix side panels with mcmaster adhesive #123.
  

eMachineShop can assemble:

• Bolts
• Nuts
• Inserts: PEM, Helicoil, Slimserts, Keenserts, etc. (first create the thru or blind hole using the normal CAD interface). Customer is responsible for choosing proper hole dimensions.
• Hinges
• Pins
• Rivets
• Joining parts with adhesive (e.g. an acrylic box)
• etc.