Ungrouping projections

[bgcsjc]

How do you ungroup line segments from the front view? It doesn't appear to allow you the
option to ungroup the line segments at all. I'm trying to match the rounded corners I have
on the top view with rounded corners on the front view.

[Tech3]

You are trying to ungroup projection of lines created in other views. Please switch to respective [-- login to view link --] to edit original line.

[bgcsjc]

So is it even possible to do what I want to do, which is duplicate the same outside circular shape
around the hole in the material I have on the top view to the hole from the front view. Nothing I tried seems to work. The only thing I thought might work is to ungroup the line from the top view
select the line segment and create a round edge with the .375 radius to match the other one but it won't let me do that either, it will only do a very small radius on the edge.

[Tech3]

Use the [-- login to view link --] feature.

[bgcsjc]

When the looking at the part in top view and you select the most outside line on the drawing, then chose line - machine - near edge - select round - set radius, then do the exact
same thing from the bottom view. When you look at the part in 3D view you see all the outside
edges are round with the selected radius except the outside line segment that was made in the
front view using the outside air setting ( it's the outside 180 degree arc), the only outside edge on the part that is not rounded. What I'm wondering is there a way to round the rest of the outside edge of the part.

[Tech2]

You would need to use [-- login to view link --] .