Select Page
Home / Resources / CAD Help / 3D Advanced / Angled Walls

Angled Walls

An angled wall is one at an angle other than 90 degrees. You can create angled walls on outside or inside shapes. For example, you might want a tapered wall inside a round hole or when designing injection molded or cast parts, you may need to use walls of about 92 degrees to allow your part to be easily removed from the mold. 

To set the angle of a wall:

  1. Choose a line in your drawing.
  2. Set Line | Machine | Auto | Side Wall | Angle to the desired angle. 
  3. Click OK.
Was this information helpful? YES SOMEWHAT NO