Select Page
Home / Machining / Secondary Processes / Slip roll bending

Slip roll bending

eMachineShop can provide bends using a slip roll with the following specifications:

  • Rolls are 24"
  • Width * Thickness ^ 2 must not exceed:
    • 0.10 for aluminum 5052
    • 0.07 for aluminum 6061
    • 0.15 for brass
    • 0.05 for steel
  • Radius > 1.5"
  • Angle 1 to 360 degrees

To specify slip rolling use comments to machinist to indicate the bend region, radius and curvature direction (e.g. "Slip roll bend from A to B, radius 3 in, concave"). 

Slip_roll_former

slip_roll_sample_2

Was this information helpful? YES SOMEWHAT NO